The new Cooler Master V6GT CPU Cooling Unit packs a range of great features as standard, such as the use of a Double-V heatpipe design, twin 120mm DynaLoop PWM fans, a built in LED strip on the top and of course support for multiple CPU sockets.
Cooler Master has designed the V6GT as a no compromise air cooler and has come up with several new key improvements that makes this one of the best CPU air coolers on the market.
Cooler Master put V6GT coolers through torture tests by using them to cool a pair Xeon X5670 processors on EVGA’s Classified SR-2 motherboard and a i5 655K processor.
The Xeon X5670 processors were overclocked to 4GHz, yet the V6GTs kept both CPU’s at sub 70 degrees C, and the i5 655K was overclocked to a massive 5.269GHz under 66 degrees C, even during extended periods of extreme benchmarking at these high clock speeds.
By adding 55 densely stacked fins asymmetrically with a five degree tilt the V6GT has lower airflow resistance than your average heatpipe based cooler. This means that more air can be pushed through by the twin 120mm fans which results in vastly improved heat dissipation. The twin V shaped heatpipe layout maximizes the contact area between the 6mm heatpipes and the heatsinks, as well as putting all of the heatpipes in a direct path of the airflow.
The fans used on the Cooler Master V6GT CPU cooler uses a new type of bearings known as DynaLoop which extends the life of the bearings to 40,000hrs. The new wave shaped fan blades increases the airflow while maintaining an even air pressure which leads to less fan noise.
Both fans also features PWM fan control which further helps reduce the noise from the fans when the CPU is idle or under a low load. The fans are also easy to install and remove thanks to a new tool-free snap-on fan cover.
The fans operate at between 800 and 2200rpm and produce an airflow of 34 to 94 CFM per fan, yet the noise level is only a mere 15 to 38dBA.
The Cooler Master V6GT manages to combine great looks with great performance. It builds on Cooler Masters famous V-series of coolers. The top of the V6GT has been equipped with a cover that houses an LED light strip and you can set the colour to blue, red or purple by simply adjusting the “engine oil cap” dial on the top of the cooler.
The Cooler Master V6GT comes with a mounting kit that allows you to install it on all current CPU platforms. It’s supplied with all the mounting brackets, back plates and screws that you’d need, as well as a syringe of Cooler Master’s thermal paste.
- Corsair Launches H70 Hydro Series CPU Cooler in India
- Corsair Launches Hydro Series H70 Ultra-performance CPU Cooler
- Cooler Master Launches NotePal U3 Notebook Cooler; Features three 80mm Fans
- Corsair Launches Hydro Series H100 Ultra-performance CPU Cooler
- Corsair Launches Hydro Series H80 Ultra-performance CPU Cooler
- Antec Launches KÜHLER Flow CPU Cooler With 120 mm PWM Fan
- ARCTIC Introduces Accelero XTREME Plus VGA Cooler
- SAPPHIRE Launches Vapor-X 200W Universal CPU Cooler
- Antec Launches KÜHLER Box CPU Coolers Featuring 120mm Fan